After running HA for 2 years and tinkering with the stuff I already had, it was time to extend the little machine via Zigbee. I got an Aqara Temp/Humidity/Pressure sensor, which in itself works fine. It just chewed through 30% of battery in 4 days. Now that might be an issue with placement and signal strength (basement through 2 floors), but it doesn’t bode well unless it “levels out” at some point.

Which brings me to my actual question: does anyone know any such sensors that are wall-powered in any way? Something that can be plugged in and “forgotten” about?

0 points

Interested in the same but usb powered myself. For now using https://www.mylocalbytes.com/products/snzb-02-zigbee-temperature-humidity-sensor sensors. Got 5 of those but considering getting more. Had these for a couple of months but the battery still reports 100% for all of themm which is a bit suspicious and optimistic. Will update this oost once the battery will report anything other than 100.

permalink
report
reply
0 points
*

I’d take USB-powered, not a problem. Just something that can be plugged into continuous power.

The packaging claims a run-time up to 2 years, but I assume that’s for very optimistic placement right next to a hub. But who knows, maybe it’s just a startup issue with reporting and it’ll actually keep for a while.

permalink
report
parent
reply
0 points

I use the aqara motion sensors and the battery sensors plummet almost immediately to 70% but then stay there for months. I’ve had them for over a year now and they haven’t been a problem.

permalink
report
reply
0 points

and the battery sensors plummet almost immediately to 70%

Interesting, thanks. I’ve hit the 70% yesterday, let’s see when/if it moves from there any time soon.

permalink
report
parent
reply

I tried both the Shelly ones - the HT and the HTPlus. They are both massively unreliable, they fall off the Wifi constantly, and are a hassle to try and get back (they don’t come back online once they lose connection and require a partial re-setup). I had hoped being on wall power would change things but it absolutely doesn’t. So I can’t recommend those, sadly.

permalink
report
reply
0 points

Been there, done that. And I had exactly the same experience, which leads me to believe they’re simply crap.

permalink
report
parent
reply
0 points

I know this is an old question, but the Shelly H&T has a USB power cap that you can buy separately. Then use any micro USB cable and power supply. It’s Wi-Fi and not zigbee, and it is definitely a tad more expensive per unit. However, no need to worry about batteries. Shelly does run sales occasionally too.

permalink
report
reply
0 points

That was the first one I tried. Sounded fantastic in theory, didn’t work out for shit. For some reason the sensor dropped out constantly. The USB PSU bottom was nice though, no batteries to change.

permalink
report
parent
reply

homeassistant

!homeassistant@lemmy.world

Create post

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

Community stats

  • 620

    Monthly active users

  • 198

    Posts

  • 1K

    Comments

Community moderators