Ignoring that my country doesn’t allow Idaho Stops, or that my Provincial Government wants to actively kill cyclists by removing safe cycling infrastructure, I’ve always wondered if there’s a reason why cyclists aren’t allowed to simply ride through an intersection like the one in the photo.
I’m talking about the right side, where the bike lane could extend through the intersection without interfering with other vehicles, including those that are turning left.
This would not only keep those stops safer (clears the cyclist out of the intersection), but would just make sense from a transportation efficiency standpoint.
Is there something I’m missing, or do cyclists have to stop only because motorists would take a tantrum if they weren’t required to?
I can imagine any reasonably size truck, semi etc turning left may need to use the bike lane to avoid clipping the front of a vehicle in the lane coming through from the other way. That portion (the passenger side of the semi) of the road would be in a massive blind spot for the driver, so they’d probably be relying on bikes to have stopped according to the standard rules of the road.
Probably a pretty rare scenario, and easy enough for a cyclist to see and avoid, but rules are built around worst case scenarios, not most frequent scenarios.
I can imagine any reasonably size truck, semi etc turning left may need to use the bike lane to avoid clipping the front of a vehicle in the lane coming through from the other way.
That’s a reasonable concern. In areas where large trucks are expected to turn, you’d see traffic lights (not stop signs). At least, that’s what I’ve noticed, since the intersections themselves need to be large enough to accommodate large trucks like that.
But three ways in areas where you’d only expect small vehicles are very common around here, and stopping doesn’t make sense.
Really, we just need to permit the Idaho Stop so a question like this one becomes irrelevant. 😂
Idaho Stop is permitted at every location lacking a police officer. I see perhaps 2 in 10 not Idahoeing in my part of TO. The TO maneuver is, look for cars, look for police, if neither is present, proceed through the stop sign. I stop these days because I’m riding electric assist and starting from a stop isn’t that big of a deal and I don’t have to pay as much attention this way.
I’ll be honest, I use an Idaho Stop at some very specific intersections (with red lights) near me. I’ve been stranded at some of these lights for 10+ minutes, simply because they don’t change for cyclists. Even when they signal yellow, and you expect your light to turn green, it’ll continue as red when it detects that no cars are there.
It’s a form of subtle discrimination against anyone who isn’t in a car, and if the way is clear, I’m going through it.
I’d be riding through this like it didn’t exist pretty regularly
I’d ride through it if nobody is around.
I’m not taking chances that someone won’t swing too wide and smash into me if there’s traffic though.
Exception is oncoming traffic, because they won’t be closer than 20ft to me unless they’re aiming
People are dumb. Expect them to do dumb things and you’ll live longer.
Because you still need to yield for pedestrians.
Stop signs aren’t just to control traffic but to make sure everyone takes the time to take in their surroundings and not make hasty decisions.
If bikes could ride through without stopping, they may fly by a vehicle that’s stopped there and not see that it’s stopped to let a pedestrian cross the street and then it’s too late for the bike to stop before hitting them as they step out front in front of the truck.
That’s at least one reason I can think of.
Because you still need to yield for pedestrians.
Of course. I’m not suggesting that you blow through the stop sign while other people are there! That’s not how an Idaho Stop works.
Honestly most stop signs in rural areas and subdivisions should probably just be yield signs, for bikes and vehicles alike.
The overuse of stop signs makes it so people get used to just doing rolling stops at the intersections where it’s 99.9999% safe to do so and then start doing them unconsciously at intersections where it really isn’t safe to
Honestly most stop signs in rural areas
We’re lucky enough (at least, until urban sprawl takes it away) to have some really nice rural routes around here.
But I’ve come to some 4-way intersections where you’ll have two stop signs, and I can tell you with absolute certainty that it’s incredibly dangerous for cyclists to STOP at those signs.
Cars and trucks travelling along the crossroad are usually going in excess of the speed limit, often times where there’s a hill so you can’t see them coming. A cyclist coming off a full stop may not clear the intersection safely.
Are cars allowed to park in the intersection there? A bicycle could get hit on the rare occasion someone coming from the other road swung out to park there.
I can’t think of any other reason. And this one sucks, too.
Are cars allowed to park in the intersection there?
Generally speaking, cars are usually not allowed to park within a certain distance of any intersection. Do they abide by those laws, designed to keep other road users safe? Of course not.
I’ve come across so many of these three-ways where it really doesn’t make sense for cyclists to have to stop. Even more so when you are forced to stop at a light (that will never change due to no cars being around you), and simply permitting cyclists to ride through in the bike lane just seems like a no-brainer.
I’m floored by how many Ontario drivers I witness parking under stop signs, or at the edge of an intersection turn. Then again, “NO PARKING” and “NO STOPPING” signs are usually treated as suggestions.
Like, what cereal box did they get their license from?
Probably because a lot of people have poor driving skills and will “swing wide” when making the turn.
