https://www.youtube.com/watch?v=U4a_kJkVUis

Big Clive’s video description:

This is not a sponsored video.  I feel it’s important that people should know about this evolving technology, and Naomi is working on making it affordable.

During the pandemic YouTuber Naomi Wu presented plans for traditional mercury vapour based UVC sterilising lights with a special housing, to sterilise air in a room without exposing the occupants to the 254nm UVC light.

With the evolution and availability of the new era 222nm excimer lamps, Naomi has gone on to design a full product designed to be easy and convenient to deploy in populated areas like medical practices, waiting rooms, retail environments, food preparation areas and live events.

The special feature of the 222nm wavelength is that it is long enough to deactivate viral and bacterial air contaminants, but short enough not to pass through the outer layer of dead skin or the tear-layer of humans.  That means that it is currently considered safe to use in occupied areas.

The filter on the front of the light seems to specifically pass 222nm.  Without it there is a very slight hump in the spectral output at around 237nm.  The filter attenuates that completely.

Excimer is an abbreviation of Excited-Dimer, where a dimer is the joining of two molecules.  In the case of the excimer lamps the molecules are encouraged to bond temporarily in a plasma discharge, and when they revert back to their non-excited state they emit a photon of light at a specific wavelength determined by the chemistry.  In this case it’s molecules of Krypton and Chlorine that form brief molecules of Krypton-Chloride (KrCl), before reverting back and emitting 222nm photons in the process.

The process of creating the plasma is very similar to dielectric barrier ozone generators.  By coupling to the gasses capacitively the lamp also avoids contaminating the gasses with the electrode materials.

Note that the unit uses 500mA at 12V (6W) but has a generously rated 12W power supply that runs cool.

This technology looks like it may be valuable in medical, care, travel or social environments to limit the spread of pathogens.

Here’s a link to Naomi’s pleasingly-named online shop:- https://cybernightmarket.com/products

-24 points

Wus growing obsession with woowoo bs health science is depressing and seems like a trauma response to Covid (or a grifter one).

permalink
report
reply
1 point

UV sterilization has been used in medicine, industry and science since forever, and will be used long after nobody knows what COVID is.

As a microbiologist, I would greatly appreciate the affordable lamp that wouldn’t require me to leave the room when it’s sterilizing, and would also safely sterilize my skin before I conduct my work.

permalink
report
parent
reply
18 points

Ah, that woowoo bs health science of germ theory. Using UV light as a disinfectant is such a ridiculous idea that you would never find it being used in hospitals.

permalink
report
parent
reply
8 points
*

seems like a trauma response to Covid

Show me an adult alive today that has not been traumatized by COVID in some way.

permalink
report
parent
reply
-14 points

The vast majority of rural areas.

permalink
report
parent
reply
16 points
*

wavelength is that it is long enough to deactivate viral and bacterial air contaminants, but short enough not to pass through the outer layer of dead skin or the tear-layer of humans.

What about the eyes? As a welder the first thing I think of is getting Welder’s Flash.

permalink
report
reply
4 points

That particular very narrow frequency is supposed to be safe. Research is always ongoing, but the current consensus looks good.

Also you have to make sure the output is narrow band enough (which big Clive does).

permalink
report
parent
reply
2 points

This.

permalink
report
parent
reply
4 points

That is the tear-layer, isn’t it?

permalink
report
parent
reply
4 points

Welding is much much higher power than this 6w lamp. I bridge both spaces. I did my LA structural steel cert out of Local 12 many years ago.

permalink
report
parent
reply
5 points

Most of the power in welding doesn’t go into UV generation, but this lamp is all about the radiation. I’d like to see a comparison of their respective UV outputs to be sure.

permalink
report
parent
reply
6 points

It is 6w before power supply losses and then a tube that is likely under 20% efficient. The primary thing that gets you with welding is the fraction of a second before an auto darkening lens activates. It is a tiny amount of time, but it adds up. Or all those times you accidentally touch the tungsten to the pool with tig. Welding has a wide spectrum, but it is the power that matters most here. The frequency and power are two separate and unrelated things. Like your microwave and WiFi are both 2.4 GHz machines. Your WiFi in your home router is limited to 100 milliwatts and is totally harmless. Your microwave needs a Faraday cage built in to avoid cooking you from the inside out because it is likely around 1500 watts. At 220nm the frequency doesn’t pass through skin or eye fluid and the power output of the light is low. Seriously, try getting into things like telescope filters where you’re trying to isolate certain frequencies. It is challenging at these frequencies to find anything that is transparent. Of all of my science books, my optics handbook is by far the largest and hardest for me to follow. That isn’t saying much, but I have built my own telescope electronics and eyepieces, along with hobby electronics, designing and etching circuit boards and photolithography using various UV lights I have built. Six watts is nothing major. I would be more concerned about how limited of an area one light can cover.

permalink
report
parent
reply
51 points

This is the first thing I have heard from her about what she’s working on since she had her “wings clipped”. Hope she is still doing good…

permalink
report
reply
28 points

Yeah, it’s a shame that she doesn’t seem to be able to put herself front-and-center with this. I hope she’s able to get herself and her family out.

permalink
report
parent
reply
18 points

Last time I read something from her on the topic, she seemed to like Shenzhen too much to want to get out.

That was before things took a turn in her life, though. I wonder if that has changed.

permalink
report
parent
reply
32 points

Her partner is Uyghur. She said that she can get out but the other girl can’t. I hope they’re both doing well.

permalink
report
parent
reply
6 points

Thanks for sharing this. One of my biggest ‘pet peeves’ is the cost of air filters, and the cost of replacement filters. The Nukit Tempest looks like an excellent option. And in combination with Nukit Lanterns or Torches looks like a superior alternative.

permalink
report
reply
5 points

Aw I would buy one right now but she’s not selling them to Canada.

permalink
report
reply

Technology

!technology@lemmy.world

Create post

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


Community stats

  • 15K

    Monthly active users

  • 6.7K

    Posts

  • 154K

    Comments