I have installed Linux Mint 22 in a DELL laptop with a buggy ACPI implementation (the kernel complains about it during boot). The laptop hangs if it goes to sleep (I tried various Linux distros/kernel-versions, the result is the same).
Because of that, I have disabled SLEEP in the firmware (latest version for that laptop btw). So basically, when you close the lid, nothing happens (it just locks the screen).
However, sometimes you might be in a hurry and you close the lid to do something else, and then you forget about it. The result would be for the battery to run dry, which eventually destroys the battery.
My question is: what would be the best way to setup an audible alarm if the battery reaches 20%?
Ok, I managed it by myself after a bit of tinkering. This is the bash script:
#!/bin/bash
while true
do
battery_level=`cat /sys/class/power_supply/BAT0/capacity`
battery_status=`cat /sys/class/power_supply/BAT0/status`
if [ $battery_status = "Discharging" ] && [ $battery_level -lt 21 ];
then
/usr/bin/aplay /home/eugenia/Music/alarm.wav
fi
sleep 120
done
Obviously change the path the .wav audio file to suit yours (I downloaded mine from the internet). Then, save the file (in my case, I named it battery.sh), make the script file executable ( chmod +x battery.sh via the terminal, or via the file manager).
Then add it to the Startup Applications settings panel on your distro (usually gnome and cinnamon have one). The alarm will sound if the battery reaches below 21%.
Worth running shell scripts though https://www.shellcheck.net/ (has a cli as well). Finds lots of common issues that can blow up scripts when input is not what you expect. With links to why they make the suggestions they do.
Line 4:
battery_level=`cat /sys/class/power_supply/BAT0/capacity`
^-- SC2006 (style): Use $(...) notation instead of legacy backticks `...`.
Did you mean: (apply this, apply all SC2006)
battery_level=$(cat /sys/class/power_supply/BAT0/capacity)
Line 5:
battery_status=`cat /sys/class/power_supply/BAT0/status`
^-- SC2006 (style): Use $(...) notation instead of legacy backticks `...`.
Did you mean: (apply this, apply all SC2006)
battery_status=$(cat /sys/class/power_supply/BAT0/status)
Line 6:
if [ $battery_status = "Discharging" ] && [ $battery_level -lt 21 ];
^-- SC2086 (info): Double quote to prevent globbing and word splitting.
^-- SC2086 (info): Double quote to prevent globbing and word splitting.
Did you mean: (apply this, apply all SC2086)
if [ "$battery_status" = "Discharging" ] && [ "$battery_level" -lt 21 ];
Systemd timer to poll upower when running on battery power, when battery is at 20%, use either system beep or set system volume and play a sound?
I’m sure is possible, but I’m actually asking for the exact steps/script, not the general idea. :)
Remove the loop and sleep from the script you created so it just runs and exits.
Then create a file at /etc/systemd/system/battery-alarm.service with the following:
[Unit]
Description="Sound alarm when battery is low"
[Service]
ExecStart=/usr/local/bin/battery-alarm.sh # point this to your script
Then create a file at /etc/systemd/system/battery-alarm.timer with the following:
[Unit]
Description="Run battery-alarm.service every 2 mins"
[Timer]
OnUnitActiveSec=2m
Unit=battery-alarm.service
[Install]
WantedBy=multi-user.target
Then sudo systemctl enable --now helloworld.timer to start and enable the timer on boot.
This will be a little more robust then your current script. It works without the user needing to log in. And there is nothing to get killed so will always trigger. The current script will just silently stop working if it ever gets killed or crashes.
I seem to get pop-up notifications for free in GNOME/Fedora by setting these levels in /etc/UPower/UPower.conf:
UsePercentageForPolicy=true
PercentageLow=50
PercentageCritical=20
PercentageAction=10
I think you can also configure the system to take action when it reaches the lowest level with e.g.
# The action to take when "TimeAction" or "PercentageAction" above has been
# reached for the batteries (UPS or laptop batteries) supplying the computer
CriticalPowerAction=PowerOff
However I don’t know how to get these GNOME “Power” notifications to play an audible sound (without turning on notification sounds for ALL notifications). The best I could find is this: David Bazile / gaudible · GitLab
There’s talk of better control of sound notifications in GNOME 47+, but looks like nothing much has landed yet: Notifications in 46 and beyond – GNOME Shell & Mutter
The arch wiki has a udev rule that can automatically do something if the battery crosses a certain threshold: https://wiki.archlinux.org/title/Laptop#Hibernate_on_low_battery_level
No polling which is great. I always try to do stuff on an event driven basis where possible for efficiency reasons. Gotta test this out though, since your battery might not send events for every percent change.
