This sounds like the battery and the charger’s problem to handle, not mine.
All this tech, all this automation for every damn thing, and people keep coming at me like I’m supposed to do everything manually with my fingers and eyes and maybe an alarm or something to keep me on schedule. No. Stop it.
Make the charger handle it, or shut up. Make the phone, the charger, and the battery handle it together, you know, with digital automation. Do not even mention it to me.
I don’t like this article because it misses some of the more important details around how to lengthen your device’s life and why you may or may not want to keep your battery at a specific state of charge.
- State of charge is pretty arbitrary, your charging circuit could charge between 3.0V and 4.2V (pretty typical), or it could charge between 3.2V and 4.0V and still show 4.0V as being 100% charge. Different chemistries can have slightly (or significant in the case of LFP) different voltages. The cynic in me wouldn’t be surprised if eventually 100% becomes ~4.35V because it makes their device look better to tech reviewers, but then have it default to only charge to 4.2V because it still gives suitable device life.
- The most important factors in how long your device’s battery will last are temperature and how deeply you discharge the battery. Discharging your phone down until it dies does way more damage than keeping it charged at 100%.
- At some point practicality comes into it, you would get even more total energy out of a cell if you kept it between 40% and 60% all the time, but obviously it isn’t very practical to only use 20% of your phone’s available capacity in day to day use.
- Consider how long you are storing your device. If it is always plugged in or won’t be used for months, then something like 40% to 60% would be a more suitable state of charge to keep your device at if possible. If it sits on your desk and you need to unplug it periodically and know you don’t need the full charge, then sure keep it at 80%.
Personally, I don’t stress about the batteries in my devices at all. I generally keep an eye on the power and plug it in when convenient, but target plugging it in before it gets too far below 50%. I’ve historically had almost zero issues with the batteries in my devices wearing out before I’m ready to replace it for other reasons unless it started out with marginal battery life.
Yeah, that’s been my whole experience surrounding people being upset that batteries aren’t able to be replaced in phones anymore. Don’t get me wrong, I’m not saying it’s a good habit, but I’ve never had a phone long enough for the battery’s life to degrade to the point where that degradation was more than mildy noticeable.
Maybe that says more about your phone consumption than battery life.
I try not to buy a new phone every year and I can tell you, after 3-4 years, the batteries are very noticeably dying. My last two phones (nexus 4, moto z play) both were replaced due to failing batteries, since replacing them is almost impossible (I couldn’t even find replacements that I would call trustworthy).
My usage was not super unusual, and most days I plugged them in over night and that’s it.
Just build phones with the understanding that batteries are consumables and make them easy to replace and standardized. Then swap in a new $5 battery when you need to so. Make the raw materials reclaimable too of course.
… Aren’t devices designed to only charge the battery to 90% (and report that as 100%), because actually changing a battery to 100% is pretty harmful for it?
Most high-quality LiPo-powered devices already do this at the hardware-level. The 100% level you see on the software is usually 80% actual charge on the battery.
For Android, there are a multitude of apps, such as Wattz that will tell you the actual voltage of the battery. Full may be 4.2V or 4.35V depending on the chemistry used. ACCA (root required) will let you limit charge rates and stop charging at a certain percentage.
Staying under 4 volts (around 60% for most phone batteries) will vastly extend battery service life. 80% is a bit less extension, but still far better than charging to 100%.
