As someone who’s looking to to get into the hobby, I’m curious to hear if there are any recommendations for budget friendly mechanical keyboards. I had/have a Corsair cherry red mechanical keyboard that I used probably around 10 years ago at this point when I was into gaming, but now I’d be looking for something a bit more refined, and possibly vintage as I quite enjoy using old tech. Any suggestions? I’m in Europe if that matters at all.

2 points

Ducky is worth a look.

permalink
report
reply
10 points

Take a look at Keychron. They have a lot to offer for around your budget and they go on sale frequently.

Are you looking to be able to swap switches out? If so you will need to find hot swappable switches.

If you care about backlighting they might be a little more expensive. But Keychron is reasonable. I’ve had their K2 for years and it has a better feel in it vs Corsair or Razer stuff in my opinion.

permalink
report
reply
4 points

They look great, thanks for the suggestion.

permalink
report
parent
reply
1 point
*

What’s your budget? What features are important to you?

permalink
report
reply
2 points

Less than 100€, but from what I gather this is quite an expensive hobby! As far as features are concerned I wouldn’t know where to begin. I suppose I quite like the Thinkpad X220’s keyboard experience, if that can be translated at all to mechnical keyboards.

permalink
report
parent
reply
1 point
*

It would blow your budget somewhat, but there is certainly ONE manufacturer to at least look at and smile.

As others have been saying, Keychron is currently the go-to for recommendations for first keyboards. They have a bewildering variety of layouts, most of them at several price points, and they have better European “ISO” support than most pre-built companies.

For switches, if you want it to feel a little more like your old ThinkPad, the biggest move in that direction would be to switch from Linears like your Cherry Red to “tactiles” like Browns. Those recommending “hot-swap” boards have a good point, but you’ll want to make sure the printed circuit board is well supported if/when you put in new switches. The most common damage people get with modern mechanical keyboards is a hotswap socket tearing away from the PCB.

permalink
report
parent
reply
1 point

I got a TecWare Phantom 104 for my first, it’s been good so far (about 3 years of use). The “shroud” cover piece helps with noise and light leakage. I have the brown keys, they’re pretty nice. I’ve had to replace a couple of the most used ones, but it came with some extras.

The keyboard comes with a key cap puller tool, but I recommend getting a key puller tool (to remove the keys themselves, not just the caps). They’re cheap and will make changing keys a much better experience.

permalink
report
reply
2 points

The price seems reasonable, thanks.

permalink
report
parent
reply
3 points

I’m going to against the grain a bit. If you liked and want the oldschool Thinkpad feel, look into getting a Topre board. Check out Leopold or Niz, both are decent topre clone brands.

Also, if you live in a metro area check and see if there’s a mechanical board gathering, possibly giving you a broader flavor of what’s out there that might fit your taste.

permalink
report
reply

Mechanical Keyboards

!mechanicalkeyboards@lemmy.ml

Create post

Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!

Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).

Banner by Jay Zhang on Unsplash

Community stats

  • 299

    Monthly active users

  • 192

    Posts

  • 709

    Comments

Community moderators