I have multiple things running through a reverse proxy and I’ve never had trouble accessing them until now. The two hospitals are part of the same company, so their network setup is probably identical.

Curiously, it’s not that the sites can’t be found, but instead my browser complains that it’s not secure.

So I don’t think it’s a DNS problem, but I wonder what the hospital is doing to the data.

All I could come up with in my research is this article about various methods of intercepting traffic. https://blog.cloudflare.com/performing-preventing-ssl-stripping-a-plain-english-primer/

Since my domain name is one that requires https (.app), the browser doesn’t allow me to bypass the warning.

Is this just some sort of super strict security rules at the hospital? I doubt they’re doing anything malicious, but it makes me wonder.

Thanks!

Also, if you know of any good networking Lemmy communities, feel free to share them.

28 points

They may block IP addresses associated with consumer ISPs. Assuming that’s the case, I would guess you’re seeing that as an HSTS/TLS error because their network is trying to trick your browser into redirecting to/displaying an error page hosted by some part of their network.

permalink
report
reply
8 points

Once a browser has seen an HSTS flag it will never attempt a non-TLS connection to that site (unless it successfully makes a TLS connection and the flag is gone).

This error is caused by a bad certificate. It can show up if your certificate expired, for instance. It’s confusing that the HSTS error takes precedence, I think the bad certificate should take precedence but there you have it.

My money is on the hospital trying to use TLS stripping.

permalink
report
parent
reply
28 points

Are you getting redirected to their captive portal?

Try this:

http://neverssl.com

permalink
report
reply
14 points

Thanks. I’m past the captive portal and can browse the rest of the internet no problem.

permalink
report
parent
reply
5 points
*

Assuming you’re the one adding HSTS, you’ll have to inspect the cert and/or view the content that is getting returned. On desktop Chromium you can type “thisisunsafe” to load a page even with HSTS. Not sure how to do it on mobile FF.

Would seem weird for it to be intercepting your domain’s traffic but not the rest of the internet.

Edit: just noticed you’re not even loading an SSL page. Are you using https in the URL?

permalink
report
parent
reply
1 point
*

https is in the URL, yes. I agree it’s weird, especially since my Lemmy instance works. It’s hosted by Hetzner but all of the certificate stuff is set up the same way. It could be some sort of residential IP address filter?

permalink
report
parent
reply
8 points

That’s… Perversly ingenious

permalink
report
parent
reply
2 points

I don’t get it. What’s it supposed to be doing?

permalink
report
parent
reply
1 point

Wifi networks may add popup pages by man in the middeling connections to unsecured sites. However, it’s very uncommon to see an unsecured site and people therefore won’t see the popup which grants them access after agreeing to the terms of use of the network.

permalink
report
parent
reply
20 points

I’ve only had that happen once on public wifi, and just assumed they were doing SSL stripping like you linked. I worked around it by connecting to my Wireguard VPN and routing my traffic through that.

Also, if you know of any good networking Lemmy communities, feel free to share them.

permalink
report
reply
4 points
*

Thanks. Yup, wireguard makes it work. I forgot about that from the last time.

It’s still a little curious, though. The certs for my self hosted stuff are done the same was as for the Lemmy instance I’m posting from which I can browse with no problem. The only difference is Lemmy is hosted on Hetzner. Both are behind Nginx Proxy Manager.

permalink
report
parent
reply
15 points

You’re getting a bad TLS certificate. If you press the Advanced button you should be able to see a reason why the certificate is not accepted by the browser.

It can be any reason, for example I got this error when one of my certificates expired (because I messed around with the DNS API token’s permissions and didn’t test it afterwards).

In your case it’s probably not an expired certificate because then you’d see that error everywhere not just on the hospital WiFi.

I suspect that whoever controls that WiFi is trying to hijack your connection, but it won’t work because once a browser has seen a HSTS flag it will refuse to connect to that site in any way except TLS (with the correct certificate ofc).

Kudos for enabling HSTS btw, excellent move.

I’ll be very curious to see what the browser says the reason is.

And yes the HSTS error is completely unhelpful in this scenario. The fact HSTS blocks the connection is secondary, the much more important detail is why TLS could not be established.

It’s like if your house key didn’t work and you were told “you know, doors require a key to be unlocked”. You’d be like “dude, I know, I have the key right here, why isn’t it working?”

permalink
report
reply
1 point

I don’t plan on being back at the hospital for a while, so I guess we’ll never find out!

I use a wildcard certificate, I wonder how common that is? That might be something they block, but yeah… I wonder why.

permalink
report
parent
reply
3 points

FWIW when you can’t connect to a website Firefox shows you the “hm we’re having trouble finding that site” error.

permalink
report
parent
reply
2 points

Nah, wildcard cert wouldn’t play into it at all.

permalink
report
parent
reply
13 points

The network is blocking your domain but your browser won’t show the block page because the certificate is incorrect.

I’ve had my domain blocked by a few corporate networks for being “potential spam” or some such nonsense.

permalink
report
reply
5 points

A redirect would work. This is not a redirect, it’s TLS hijacking. Someone’s injecting a bad certificate into OP’s connections.

permalink
report
parent
reply

Selfhosted

!selfhosted@lemmy.world

Create post

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.

Rules:

  1. Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

Community stats

  • 3.8K

    Monthly active users

  • 1.5K

    Posts

  • 13K

    Comments