Mine runs at 30watts at idle.
That powers 4 switches, 1AP, and my proxmox system (framework laptop motherboard) which runs my router and my services.
What is everyone else’s usage and what does it power?
My proxmox server runs at 60W idle, which is the main Reason why I am getting a new system soon. Old one is running a old (2011 I think) dual core celeron.
Hmm according to homeassistant my Rack+PC consumed precisely this much over the last day (graph from homeassistant). I have been trying to minimize power consumption through more efficient hardware, but you can only go so far without making big sacrifices.
wow. unless you’re doing lots of compute / AI stuff /crypto or have multiple servers or a big amount of spinning storage, i bet your 450W is far from ‘efficient’ without ‘sacrifices’. You can have one decent cpu with a few cores, one or two spinning hdd and one or two ethernet NICs idling at 20W to 40W. probably also including a few VMs with light usage.
My rack currently consumes about 300W. This includes the following hardware:
- Dell PowerEdge R730 with 128GB RAM, 1x E5-2630 v3 (the second socket is unpopulated), 5x HDD and 4x SSD
- MikroTik CRS309-1G-8S+ (8 port 10Gbit/s switch)
- MikroTik CRS326-24G-2S+ (24 port 1Gbit/s switch)
- MikroTik RB5009UPr (Router)
- Whitebox NAS with Intel Pentium Gold G5400, 16GB RAM, Adaptec RAID controller in IT mode, 19x HDD and one SSD
Out of curiosity, what whitebox are you using for the NAS? An old PC or something you assembled purposely for the NAS? Would love to see pics too as I’m considering going down this route.
I’ve purposely build that NAS around two or three years ago. It’s a Gigabyte B360M D3H mainboard, Intel Pentium Gold G5400 and 16GB of the cheapest RAM I could find. An Adaptec 71605 card provides SAS/SATA connections for up to 16 drives and a Mellanox Connect-X3 connects my NAS via 10Gbit/s to my network. The case is an Inter-Tech IPC 4U-4424 . It has 24 hot swap bays. But I would not recommend it because the backplane is terrible. Four or five slots are not working. Sometimes, when I re-insert a drive, it is not detected.
Using cheap RAM bit me in the ass last year as one of the RAM sticks started to fail. I didn’t notice that there is a problem with the RAM at first. Only when I observed that one of my scripts was not working I started to investigate the problem. Turns out that one of the RAM sticks failed. Re-inserting the stick did not resolve the problem so I replaced all sticks with old Crucial RAM I had laying around. Some files that I transfered to the NAS during that time period are corrupt. In the future I won’t use cheap RAM anymore and I’m also currently planning to replace the mainboard and CPU with something that supportes ECC RAM so that I can be notified when on of the sticks starts to fail.
Comparable to your’s. My Server/NAS usually is at about 15W to provide me and family/friends with a few selfhosted services. If i use it for backup or access some old photos/dvds it may spin up another hdd or two and it may draw additional power. (Or use the cpu). The cable modem and wifi router need another 20W combined.
I think that should be around 300kW per year. A bit more than the fridge in the kitchen claims to use per its energy label.
(edit: it’s always very interesting to ask where people live (and what they’re paying for energy) when asking questions like this. I’m not sure but i believe 300W in Texas is like 40W in Germany ;-)
Why are you asking, did my wife get you to ask?
But around 300w with 24 port switch, dish shelf (3.5" disks) and server with ssd’s and 2.5" disks
I feel for those in Europe, these are the current spot prices in NZ
Edit corrected image:
I approve of the y-axis label. But everything else is kinda missing… Like the information what’s depicted on the diagram. Cost of production? Price for a end-user? pre- or after tax? which country? and why did someone paint in 5 different colors? It certainly doesn’t match what i’m paying.
From New Zealand and is averaged wholesale spot prices for the 5 (main) produces here
