Got this email from Autodesk that Fusion is increasing their annual price by a huge amount. I subbed for 1 year a couple years ago for I think $380. Then I was able to get an educational sub after that. Fusion is still the cheapest CAD software out there, not including the free stuff like FreeCAD, but still, this price increase is massive.
It should be noted that it’s still free to use for personal use minus the extra features.
The problem is that there is no real competitor to fusion. If you think about usability/learning curve
Yeah, I’ve used multiple CAD tools, from pro/engineer to F360, but the learning curve of freecad felt like a brick wall.
I got stuck on googling how to make a fillet in freecad, to which the answer appeared to be, “yeah, nah, you sort of can’t”. Oh okay, this program is not for me.
Edit: if people want to help/criticise, I recall the problem was that I couldn’t do it parametrically, which is the only way I like to model any engineering parts. So far the only thing that information has gotten me is a downvote. If freecad is as full featured as you say, then this should be easy to do. Feel free to tell me how.
EDIT 2: after the info I got, I looked into it more and discovered my problem was a bit different - I couldn’t do a parametric offset line in a sketch, because I needed to make a particular pattern. I ended up doing it with OpenSCAD if I recall. I apologise for saying freecad couldn’t do fillets, that would’ve been extremely basic. It was still a very painful experience just to figure out that it couldn’t do what I needed.
Non-commercial is the free version, with all your parts public.
They also have a pro license with a fee, where your parts are then private obviously.
So if you make 1000$ in a year from modeling, 680 goes to fusion360
No, no - they’re not raising the price; they’re rebalancing it to reflect the value it delivers!!1!
And since they’ve reduced the free version functionality significantly, I believe I’m due a substantial rebate.
It’s one of the biggest problems of the whole 3d printing ecosystem that so many people are relying on software like fusion or tinkercad that could shut down, lose its free option, and see massive price increases on subscription software.
I wish I could wrap my head around freecad, but we’re just not there yet and we may never be. I feel like it or something like it must be our future because until we have a full libre software chain we’re living on borrowed time.
I wish I could wrap my head around freecad, but we’re just not there yet and we may never be.
May I ask why it is that you say this?
I also have this question. What is so different about the workflow between FreeCAD and other 3D CAD software? If you can do one, you can do the others.
FreeCAD is a strange mix of over-designed and unfinished.
There’s like three different workflows for doing parametric CAD, plus a drafting workflow for an AutoCAD architectural experience, plus workbenches for meshes, NURBS, etc. Occasionally a tool you need will be in another workbench. There is no official assembly workbench included. It’s not exactly obvious how workbenches work together. A lot of shortcuts which have become Just How You Do Things in other CAD software aren’t present, so you have to do things an awkward long way. Add-ons and macros can help…but are poorly documented if at all.
The learning curve is steeper mostly due to tools not having as intuitive names and ui layout.
I dove into fusion 360 last year and was making functional and nice parts within the first couple of hours. Since moving to Linux I’ve tried freecad and while I can eventually find the tools that do the same things, it is less intuitive to get there.
Additionally, when I run into a roadblock in fusion 360, I can usually find quick and easy explanations or tutorials for it, and just have not had the same luck with freecad. I can usually get the hurdle crossed with the tutorials but I find I have to look up the same stuff often as it doesn’t stick.
This is all nebulous as all hell, I admit. And I can vaguely tell that it does all the same things similarly to fusion 360, but it’s just different and obscured enough that I feel useless and obtuse using it and spend more time searching for tutorials and answers than I do designing.
I want to learn it. I want to use it. But I still find myself in fusion 360 when I need to get a part designed sooner rather than later - it took less effort and faffing around to get fusion 360 working in proton ge than getting to a stable point using freecad.
Blender is not designed as a CAD software. It is for 3d modeling. So you would use Blender to make graphics for a video game, or a 3d movie.
CAD is more for designing things to be made outside of a computer, so 3d printing, CNC or stuff like that.
Blender doesn’t consider the object as a whole, and can leave holes that a CAD setup would handle.
