sparky1337
With budget pre builts, you’re usually sacrificing performance to an extent of cheap power supplys (that can blow up) and a tier or two lesser graphics unit for the same price as you would building it yourself.
Honestly, if you’re happy with the performance the steam deck provides then you should stick with that long enough to either realize your need for a purpose built desktop, or put it in a gen 2 steam deck down the road.
I feel like in comparison to Starfield, ES6 should be smaller and more compact which should alleviate a lot of the other complaints I’ve seen.
At this point the hype alone will sell it. There may be some apprehensive players since starfield, but I don’t think it’ll impact them too much.
Also elder scrolls being their big IP, they kind of don’t have the wiggle room to screw this up.
Wolfenstein 3D or Doom. It’s hard to think which I played first. Probably Doom.
Clearance, tires, and open diffs are the big 3.
Most awd vehicles use torque sensors to brake the wheel that has no traction to push power to wheels that do. It doesn’t always work and most awd systems are clutch based so there’s slippage.
More of the basic 4wd vehicles these days come with electric lockers, more power, and better clearance. They still have road tires though so there’s room for improvement there.
I will say, most people that don’t do this stuff on a semi decent basis have ZERO idea on how to actually wheel. You can get pretty far in a base model but even the cheapest new bronco or wrangler are better equipped to deal with actual wheeling than a Subaru.
Driving Sports TV on YouTube shows how most of the vehicles work in light off-roading, and spoiler, most are terrible.
Congrats!
At this point I’d just say enjoy the new build.
Easy first steps. Enable the XMP profile in the bios to get the most out of your ram since ryzen is very sensitive to that.
Otherwise, I’d leave it as-is. Maybe grab 3DMark on sale ($5 or so) from steam and bench your system just to make sure you’re within expected results compared to others.
PBO for the cpu pretty much gets you 90% there on your max cpu overclock plus a little more voltage than you’d have with a manual one. The X3D cpus are really thick with the stacked cache so they do require decent cooling compared to non X3D skus. So it may just run a little warm but nothing crazy.
The big thing these days for gpu’s is undervolting. I’ve been able to cut out 50w or so from my 3080 with no discernible performance hit when coupled with my 5600x. Check out the Optimum YouTube channel (formerly Optimum Tech) on his undervolting results. His videos are a little older but are applicable to most gpus that are power hungry.