I am slightly offended by other people believing in God but I generally keep it to myself. 😂

Unfortunately I didn’t take before/after measurements but this thick plastic sheet cannot be good for the chipset thermals. 🥲

Well it’s not the government doing this it’s private insurance companies. You’re free to shop around or start your own insurance company. This makes me feel much better about gatekeeping healthcare. 🦅🇺🇸

Also the last democratic presidency has sucked a lot less corporate than previously.

Funny enough, I can’t detect the smell from hell. Could be COVID.

This is one of those situations when you just nod and take the endorsement.

I think I found the source of the liquid @abcdqfr@lemmy.world. The thermal pad under the VRM heatsink has begun to liquefy into oily substance. This substance appears to have gone to the underside of the board through the vias around the VRM and discolored itself.

Some rubbing with isopropyl alcohol and it’s almost gone:

Perhaps there’s still life left in this board if used with an older chip.

Goddamn.

Hard to say. She’s been in 24/7 service since 2017. Never had stability issues and I’ve tested it with Prime95 plenty of times upon upgrades. Last week I ran a Llama model and the computer froze hard. Even holding the power button wouldn’t turn it off. Did the PSU power flip, came back up. Prime95 stable. Llama -> rip. Perhaps it’s been cooked for a while and only trips by this workload. She’s an old board, a Gigabyte with B350 running a 5950X (for a couple of years), so it’s not super surprising that the power section has been a bit overused. 😅 Replacing with an X570 as we speak.

I’m dying here. 🤣